A customer in Cheshunt rang us because the house they had just bought was behaving strangely.

Some switches did nothing. A few sockets sparked, and others worked one minute and were dead the next. The house was built around the 1930s, and they had no idea what was going on behind the walls.

I'm Dan, and I've been an electrician for 20 years, a good share of our work at JJB Electrical is in houses like this one. Cheshunt has a lot of 1930s housing stock, and plenty of it still has outdated electrics that have been added to and bodged over the decades. So when I hear "sparking sockets" and "1930s" in the same phone call, I have a fair idea of what we're about to find.

This post follows that job from the first test to the finished house rewire. If you're a homeowner wondering about your own electrics, or a letting agent looking after older properties, it should give you a clear picture of what goes wrong in these houses, how we find it, and what a rewire involves.

It started with electrical testing, before anyone mentioned a rewire

We didn't walk in and quote for a rewire. The first job was an Electrical Installation Condition Report, usually shortened to EICR. Think of it as an MOT for the fixed wiring in a house. We inspect the fuseboard, sockets, switches and light fittings, then we carry out electrical testing on every circuit with calibrated instruments. The report tells you what condition the installation is in and lists anything dangerous or in need of improvement.

On this house, the results told the story quickly.

Lights fed from sockets

Somebody had wired lights off the socket circuits. Lighting and sockets belong on separate circuits, each with cable and protection sized for the job. When a light is fed from a socket circuit, a thin lighting cable can end up protected by a fuse or breaker rated for a much heavier cable. If a fault develops, that cable can overheat before anything disconnects it.

Low insulation resistance readings

An insulation resistance test checks that the insulation around each conductor is still doing its job. Healthy cable gives a high reading. We got low readings here, which means the insulation was breaking down somewhere and current had a path to leak where it shouldn't. Low readings are a warning sign for electric shock and fire, and they often point to old or damaged cable.

Open ring final circuits

Most socket circuits in UK homes are wired as a ring. The cable leaves the fuseboard, loops round every socket and returns to where it started, so the current has two routes to each socket. Our tests showed ring circuits with open conductors, meaning the loop was broken. An open ring still appears to work, because the sockets still have power. The trouble is that the load now travels down one leg of cable that was never designed to carry it alone.

Bodges everywhere

Beyond those specific faults, we found bodges everywhere we looked. Between them, the test results explained the dead switches and the sparking sockets the customer had noticed.

Giving the customer the full picture

We talked the customer through everything we had found, in plain English. With an installation in that state there are usually two routes. You can repair the faults one by one, or you can rewire. Patching makes sense when the wiring is basically sound and has a few isolated problems. This house had problems on circuit after circuit, so every repair would have been joined onto cable we couldn't trust.

The customer opted for a full rewire. I think that was the right call, and what we found next proved it.

What we found when the floors came up

An EICR can only tell you so much, because most of the wiring in a house is hidden. Once we started taking up floors, we saw the real state of things.

Junction box on junction box

Under the floors we found junction box on junction box. Each one marks a time somebody extended or altered a circuit, and each joint is another place for a connection to work loose and heat up. Buried under a floor, nobody can inspect them or tighten them.

VIR cable mixed in with newer wiring

Some of the cable was VIR, which stands for vulcanised India rubber. It was the standard house wiring cable in the first half of the last century. Rubber insulation dries out with age, turns brittle and crumbles when it's disturbed, leaving bare copper behind. In this house it was still in service, mixed in with newer cable, so parts of the installation were only as good as rubber that was decades past its working life.

Neutrals borrowed from the socket circuits

We also found neutrals for the lights taken from the socket circuits. Electricians call this a borrowed neutral. Every circuit should have its own live and its own neutral. When a neutral is borrowed from another circuit, you can switch off the lighting at the fuseboard and still have current flowing in a wire you believe is dead. It's a hazard for anyone who works on the house afterwards, and it causes nuisance tripping on modern RCD protection.

Chewed, damaged and burnt cable

Some of the cabling had been chewed. Other runs were physically damaged. The worst of it was burnt cable with exposed live cores. That is live copper with nothing around it, sitting among timber joists under the floor of a house somebody had just moved into.

The customer had noticed a few sparking sockets. Underneath was a serious fire risk, and no amount of patching would have made that house safe.

How the house rewire went

We rewired the whole property to the 18th Edition of the Wiring Regulations, BS 7671, and to the customer's own spec. BS 7671 is the national standard for electrical installation work in the UK.

A full house rewire happens in stages, and it helps to know them before you commit.

  • First fix. We lift floors and cut channels into the walls, then run new cable to every socket, switch and light position. This is the dusty, disruptive part, and it's where the old wiring comes out of service for good.
  • Second fix. Once the walls are made good, we fit the sockets, switches, light fittings and the new consumer unit, which most people still call the fuseboard.
  • Testing and certification. We test every new circuit and issue an Electrical Installation Certificate. A rewire is notifiable under the Building Regulations, and as a NAPIT registered firm we handle that notification for you.

Why the customer's spec matters

A rewire is the one time every floor and wall is open, so it's the cheapest moment to get the house the way you want it. Think about where your furniture goes and where you always wish there was a socket. Decide whether you want downlights in the kitchen, a supply ready for garden lighting, or a feed in place for an EV charger. If solar panels and battery storage are on your list for later, tell us at the start and we can plan the new fuseboard around them.

Adding these during the rewire costs far less than coming back afterwards and lifting the same floors twice.

What this job says about buying an older house

I'd give two pieces of advice to anyone buying in Cheshunt, or anywhere with a lot of older housing.

Get a proper EICR before you buy

This customer found out about the wiring after they had the keys. A standard homebuyer's survey doesn't test the electrics. The surveyor may note that the fuseboard looks dated and recommend a specialist check, and that recommendation is easy to skip when you're busy with solicitors and removal vans.

A proper EICR before you commit tells you what you're buying. If it shows the house needs a rewire, you can renegotiate the price or budget for the work. You can also have the work done while the house is empty, which is quicker and easier for everyone. Had this customer known, the rewire would have been in the purchase plan from day one.

Don't go for the cheap quote

Quality over price, every time. With a rewire, almost everything you pay for ends up hidden under floors and behind plaster. You can't see whether the cables are properly sized, routed and supported, or whether the testing was done at all. The house in this post is what cheap electrical work looks like years later, when somebody else is living with it.

When you compare quotes for house rewires, check what's included. Ask how many sockets and lights are allowed for, whether making good the plaster is covered, what consumer unit you're getting, and whether you'll receive a certificate and Building Regulations notification. A low price usually means something on that list is missing.

A note for letting agents and landlords

If you manage rented property, electrical testing is a legal duty. In England, the wiring in a privately rented home must be inspected and tested at least once every five years, and the tenant must be given a copy of the report. Older stock is where unsatisfactory reports tend to come from, and 1930s houses that have been through several owners are high on that list.

Our advice is the same as for buyers. Test early. An EICR on a newly acquired or newly managed property tells you where you stand before a tenant moves in. It also gives you time to plan remedial work, or a rewire, between tenancies.

Signs your own house might need testing

You can't judge wiring by looking at the front of a socket, but some signs should prompt a test:

  • Sockets that spark, crackle, feel warm or work intermittently
  • Switches that do nothing, or lights that flicker
  • An old fuseboard with rewirable fuses or no RCD protection
  • Round pin sockets, or old rubber or fabric covered cable in the loft or under the stairs
  • Fuses that blow or breakers that trip regularly
  • No record of the electrics ever being tested

None of these proves you need a house rewire. They mean you need someone to test the installation and tell you the truth about it. Plenty of EICRs end with a short list of repairs and a fuseboard upgrade.

A bit about us

JJB Electrical Ltd is registered with NAPIT and MCS, and we're members of TrustMark and Which? Trusted Traders. Those schemes assess our work, so you don't have to take our word for it. We have more than 200 customer reviews you can read for yourself.

We also turn up when we say we will. That sounds like a low bar until you've spent a day waiting in for a tradesperson who never shows.

If you've been searching for "house rewire near me" from Cheshunt or the surrounding area, we know these houses well, the 1930s ones especially. House rewiring in Cheshunt is everyday work for us, and we're always happy to talk a job through before you decide anything.

Frequently asked questions

Are my electrics safe?

I can't tell you without testing them, and neither can anyone else. If your house is older, has no record of testing, or shows signs like sparking sockets or dead switches, book an EICR. It gives you a clear answer circuit by circuit.

How do I know if I need a full house rewire or just repairs?

The EICR decides that. If the wiring is basically sound with a few isolated faults, we repair them. If we find faults on circuit after circuit, old rubber cable or damaged insulation, as we did on the Cheshunt job, a rewire is the safer and more sensible route.

How long does a house rewire take?

It depends on the size of the house, how it's built and whether anyone is living in it. We give you a timescale once we've seen the property, and we stick to it.

Can I stay in the house while you rewire it?

You can, but expect floors up, dust and the power off for parts of the day. An empty house is quicker and easier, which is one more reason to test before you move in.

How much does house rewiring in Cheshunt cost?

Every house is different, so I won't quote a figure in a blog post. We price a rewire after we've seen the property and agreed your spec, and the quote sets out exactly what's included. Be wary of a quote that comes in far below the others.

I'm a landlord or letting agent. How often do I need an EICR?

In England, privately rented homes need the wiring inspected and tested at least once every five years, and the tenant must get a copy of the report. We recommend testing when you take on an older property so you know its condition before a tenancy starts.

Want us to take a look?

If anything in this post sounds like your house, or you're about to buy an older property in Cheshunt and want to know what you're taking on, give us a ring. Call us on 01992 276087 or fill in our contact form. We'll get back to you as soon as we can, and we're happy to take a look with no obligation.

Accredited & Approved

Checked, certified and accountable

We're assessed by independent bodies so you don't have to take our word for it. Every job is certified, Part P compliant, and registered with your local authority.

NAPIT Registered Competent Person, Part P Electrical Safety Registered Installer, TrustMark Government Endorsed Quality, Hertfordshire Trading Standards Approved, and Which? Trusted Trader accreditations MCS Certified

MCS Certified (Solar PV & Battery Storage) · Certification No. NAP-33552

What Our Customers Say

Rated 5.0 out of 5 across 127 Google reviews from homeowners across Hertfordshire and Essex. We're also a Which? Trusted Trader.

★★★★★

"Very happy with our full house rewire — very professional and respectful, excellent service quality and great workmanship from Dan, Jamie and the team. Highly recommended."

DO
David Ottolangui
Google Review · Full Rewire
★★★★★

"I recently had my house completely rewired by JJB Electrical. From start to finish, Jamie, Dan and team were professional, knowledgeable, and incredibly efficient. The work was completed on time and with minimal disruption. First-class service from a team that truly knows their stuff!"

PC
The Pilates Corner
Google Review · Full Rewire
★★★★★

"I couldn't be happier with my experience with Jamie and Dan. They were extremely polite and knowledgeable. They patiently explained everything and never made me feel silly for asking basic questions. They went above and beyond to make sure my home was secure and safely wired. I'd highly recommend them to everyone, especially first-time buyers."

HM
Hannah McLaren
Google Review

Ready to book your free home visit?

No obligation, no high-pressure sales — just an honest look at the job and a fixed-price quote you can think about overnight.

Or call us directly: 01992 276087